Introducing the Mastersizer 3000 Chapter 2
Mastersizer 3000 Page 2-3
The Extended software feature set is detailed later in the Software overview
chapter; Customising the software interface section.
To simplify the text throughout the manual, the 3000 and 3000E instruments will
be referred to as the Mastersizer (or “the optical unit” or “the instrument”), unless
it is necessary to differentiate or highlight any differences; then the instrument will
be identified as Mastersizer 3000 or 3000E as appropriate.
IQ/OQ Validation •
CFR21 part 11 ER/ES
(additional Feature key
necessary)
•
Mastersizer 3000E
- Basic software
feature set
Mastersizer 3000E
- Extended software
feature set
Mastersizer 3000
To Next Page
Loading...
