Chapter 4 Making measurements
Page 4-16 MAN 0474
Making manual measurements
In addition to SOP measurements, users can also make manual measurements.
This may be useful, for instance, when investigating the most appropriate method
for sample dispersion prior to setting up an SOP. This section provides details on
how to run a basic manual measurement.
Note
This process description assumes that a wet dispersion unit is connected to
the instrument.
The basic procedure is similar to that outlined in the SOP measurement section,
but requires the user to set up the measurement settings initially, and then manu
-
ally initiate more stages during the live measurement process:
1. From the Home ribbon click Manual measurement from the Measure-
ments group. The Manual Measurement window is displayed, together
with the Manual Measurement Settings window:
To Next Page
Loading...
