Malvern Mastersizer 3000 - Advanced features; Introduction

Mastersizer 3000 Page 9-1
9

Advanced features
Introduction
Advanced users can exploit additional features of the Mastersizer application soft-
ware that are not normally required as part of the basic measurement process.
These features enable a supervisor to set up options that may help operators use the
system in a more standardised way.
This chapter focuses on the following areas:
 Doing more with SOPs, including how to set up SOP templates and analyse
the development history of an SOP.
 Editing records that have already been made.
 Exporting data and working with export templates.
 Maintenance utilities.
Doing more with SOPs
Extracting an SOP from a measurement
From time to time it can be useful to extract the settings used to make a measure-
ment into an SOP, so that the same settings can be applied to further measure-
ments.
1. From the Record View, right click on the record(s) that you wish to extract
the settings from and choose Extract SOP
.
2. The SOP Editor is shown containing all of the settings used at the time the
measurement was created. If more than one record was selected, multiple tabs
are shown in the SOP Editor.