Chapter 4 Making measurements
Page 4-36 MAN 0474
Measurement - Obscuration
The Measurement Obscuration settings enable you to specify the obscuration lev-
els between which the measurement will be conducted. This is critical for ensuring
the correct amount of sample is added to the measurement system.
The optimal obscuration settings for a measurement are both sample and disper-
sion unit dependent. As a rough guide, use a range of 10-20% for a wet dispersion
unit and 1-10% for a dry dispersion unit.
Note
For more advice on obscuration settings see the Help.
To Next Page
Loading...
