HOISTS 777 SERVICE MANUAL
5-6 Published 10-01-2012, Control # 045-08
Storing Electric Cable
See Figure 5-5 for component identification.
The electric cords for the boom, fixed jib, and luffing jib are
long enough to accommodate the maximum length of each
attachment.
Store the excess cords for the boom and luffing jib on the reel
mounted on either butt. The reel has a locking pin.
Disengage the locking pin to allow the reel to be wound.
Engage the locking pin to lock the reel in position. The power
supply cord to the reel must be disconnected before the reel
can be wound.
Store the excess electric cord for the fixed jib by winding it
around the brackets on the fixed jib butt.
FIGURE 5-5
A1007
Luffing Jib Butt
(top view)
Boom Butt
(top view)
Fixed Jib Butt
(left side)
Item Description
1 Cable Reel
2Cord
3Brackets
1
2
3
1
2
2
To Next Page
Loading...
Need help?
General
