Additional page GMK6400 3 113 060 en 3
22.01.2014
Attaching/detaching fall prevention safety system
to/from safety harness
Attachment
All points designed for fastening a fall prevention safety system are marked
with a symbol.
When stepping, observe the following procedure so that you are always
secured.
• Use the available ladders and access lad-
ders on the truck crane to climb up;
à Operating manual.
• Make sure you always attach one line of the
fall prevention safety system with the safety
harness before entering the main boom.
• Attach the second line of the fall prevention
safety system with the safety harness once
you are located on the main boom.
s
G
Risk of accidents due to incomplete safety system
Make sure you always attach one line of the fall prevention safety system
with the safety harness before stepping onto the main boom.
This will prevent falling due to an incomplete safety system.
To Next Page
Loading...
