Driving
5.3 Driving and turning off the truck crane
Operating manual GMK 6400 3 112 993 en 5 - 39
12.07.2013
While driving • Observe all warning messages.
On the instrument panel
– If one of the lamps (1) which has already been checked lights up again,
observe the information in the previous section.
– When one of the lamps (1) lights up, stop the truck crane immediately and
check the message;
à p. 5 - 53.
–When the
ECOS display shows a warning message (1); Ã Warning sub-
menu
, p. 5 - 47.
• Also note the control elements for fuel
supply and if necessary, DEF supply, engine
speed, coolant temperature, transmission
and hydraulic oil temperature;
à p. 4 - 22.
S
Risk of damage if warning messages are not observed
After a warning message appears (on the
ECOS display or combination
instrument
display), always promptly observe all information in the section
titled
Warning submenu, and take the appropriate corrective measures. This
prevents these malfunctions from causing malfunctions in the truck crane.
1)
Additional equipment