Overview
1.5 Technical data
Operating manual GMK 6400 3 112 993 en 1 - 15
12.07.2013
Outriggers
s
Design: 4-point telescoping outrigger system
Control system: Can be controlled from both sides on the car-
rier and individually from the crane cab
Outrigger spans: 8.70 x 8.50 m (28.5 x 27.9 ft)
8.70 x 7.40 m (28.5 x 24.3 ft)
8.70 x 6.30 m (28.5 x 20.4 ft)
8.70 x 5.00 m (28.5 x 16.4 ft)
8.70 x 2.71 m (28.5 x 8.9 ft)
7.98 x 8.50/1.00 m (26.1 x 27.9/3.3 ft)
Outrigger pads Diameter: 700 mm (27.6 in)
Surface: 3848 cm
2
(596 in
2
)
Stroke of support cylinders 550 mm (21.7 in)
Maximum
outrigger pressure:
– Outrigger span
8,70 x 8,50 m
(28,5 x 27,9 ft)
front: 106 t (233 700 lbs)
rear: 32 t (209 050 lbs)
– Outrigger span
8,70 x 2,71 to 7,40 m
(28,5 x 8,9 to 24,3 ft)
front: 106 t (233 700 lbs)
rear: 135 t (297 650 lbs)
Inclination indicator: On the hand-held control, in the crane cab,
on the
outrigger control units.
Outrigger pressure dis-
play:
In the outriggers, integrated with a display in
the crane cab and on the
outrigger control
units depending on design.
To Next Page
Loading...
