Operating elements for crane operation
9.1 Overview of the operating elements
Operating manual GMK 6400 3 112 993 en 9 - 53
12.07.2013
H
Opposite means: on the side of the carrier opposite to the operator when
looking at the control unit.
Left-hand and right-hand mean: to the left or the right of the control unit.
Outrigger button
s
1 Operate left outrigger à p. 9 - 70
2 Operate left outrigger, opposite
à p. 9 - 70
3 Operate right outrigger
à p. 9 - 70
4 Operate right outrigger, opposite
à p. 9 - 70
5 Inclination indicator
Raise axle display
Outrigger pressure display
à p. 9 - 56
à p. 9 - 57
à p. 9 - 56
6 Additional function F1 on/Position lights for indica-
tor lamps
à p. 9 - 71
7 Additional function F2 Select axle pairs
à p. 9 - 73
8 Additional function F3 Select axle pairs
à p. 9 - 73
9 Additional function F4 Menu selection
– Outriggers
or
– Raise axle
à p. 9 - 73
10 In the Outrigger menu
– Retract all supporting cylinders
In the Raise axle menu
– Raise axles
à p. 9 - 71
à p. 9 - 73
11 Pre-select high-speed mode
à p. 9 - 70
12 Switch measuring range
à p. 9 - 72
13 START engine
14 In the Outrigger menu
– Extend all supporting cylinders
In the Raise axle menu
– Lower axles
à p. 9 - 71
à p. 9 - 73
15 – Pre-select normal speed
– Automatic levelling
(as additional function F1)
à p. 9 - 70
à p. 9 - 71
16 Horn
17 Engine STOP
To Next Page
Loading...
