Overview
1.10 Identification
Operating manual GMK 6400 3 112 993 en 1 - 33
12.07.2013
The following plates and numbers are attached to the truck crane for iden-
tification purposes:
The location of the identification numbers on removable rigging parts (e.g.
counterweights, lattice extension) is described in the corresponding chap-
ters or in the relevant operating instructions provided.
1 Serial number and crane type
2 The CE mark, only with truck cranes that are delivered in member
countries of the EU.
3 The serial number of the driver's cab
4 The chassis number and crane type
5 The chassis number in front of the first axle line in the frame.
To Next Page
Loading...
