MG MG6 Series 2011 - Release Handle - Interior - Front Door; Switch - Electric Window Lift - Front Door - Passenger

Doors
BodySystems
ReleaseHandle-Interior-FrontDoor
Remove
1.Removefrontdoortrimcasing.
Trim Trim
Trim
casing casing
casing
- -
-
front front
front
door door
door
remove remove
remove
2.Remove4screwssecuringfrontdoorreleaseinterior
totrimcasing.
3.Removefrontdoorinteriorreleasehandlefromdoor
trimcasing.
Ret
1.Positioninteriorreleasehandletofrontdoortrim
casingandsecurewithscrews.
2.Fitfrontdoortrimcasing.
Trim Trim
Trim
casing casing
casing
- -
-
front front
front
door door
door
refit refit
refit
Switch-ElectricWindowLift-FrontDoor-
Passenger
Remove
1.Disconnectbatteryearthlead.
2.Removeaccesscoverfrominteriorhandleandremove
screwsecuringhandletodoor.
3.Release2clipssecuringgrabhandlecovertotrim
casingandremovecover.
4.Remove2screwssecuringgrabhandletodoor.
5.Removerearscrewsecuringtrimcasingtodoor.
6.Carefullyrelease8clipssecuringtrimcasingtodoor.
7.Liftdoortrimcasingandreleasefromdoor.
8.Disconnectmultiplugfromtweeter.
9.Disconnectmultiplugfromswitchpack.
10.Releaselockoperatingcablefrominteriorhandle,
releasehookandremovetrimcasing.
11.Carefullyrelease3clipssecuringswitchpacktodoor
casing.
12.Removeswitchpack.
Ret
1.Fitwindowswitchpacktotrimcasing.
2.Connectmultiplugtowindowswitchpack.
3.Connectmultiplugtotweeter.
4.Connectoperatingcableandpositiontrimcasingto
door.
5.Fittrimcasingtodoorandsecurewithclips.
6.Fitrearscrewsecuringtrimcasingtodoor.
7.Fitscrewssecuringgrabhandletodoorandtgrab
handlecover .
8.Secureinteriorhandletodoorwithscrewandt
accesscover.
9.Connectbatteryearthlead.
Version2.0795