MG MG6 Series 2011 - Seat Complete - Driver

Seats
InteriorFitting
8.Remove4Cringsandrelease5fasteningstripssecuring
cushioncovertoframe.
9.Releasecushionfoamfromframeandremove.
10.Releaseelasticstrapandremove13Cringssecuring
covertofoam.
11.Removecushioncover.
Ret
1.Fitcushioncovertofoamandsecurewithelasticstrap
andnewCrings.
2.Fitcushionfoamtoframeandsecurecoverwith
fasteningstrapsandnewCrings.
3.Fitseatsquabtocushionandsecurewith4bolts,
tightento40–50Nm.
4.Connectsquabharnessmultiplug.
5.Securesquabcovertocushionframewithclips.
6.Fitinnervalanceandsecurewithclipandscrew.
7.Fitoutervalance.
Side Side
Side
Board Board
Board
Outer Outer
Outer
- -
-
Power Power
Power
Seat Seat
Seat
Refit Refit
Refit
Seatcomplete-driver
Remove
Warning:Alwaysremovetheignitionkeyfromtheignition
switch,disconnectthevehiclebatteryandwait10minutes
beforecommencingworkontheSRSsystem.
1.Moveorpowerseatfullyback.
2.Remove2coversfromfrontxings.
3.Remove2boltssecuringfrontofseattobodyand
discardbolts.
4.Moveseatfullyforward.
5.Remove2boltssecuringrearofseattobodyand
discardbolts.
6.Disconnectbatteryearthlead.
Version2.0679