MG MG6 Series 2011 - Camshaft Drive Belt Cover - Front Upper; Camshaft Drive Belt Cover - Rear Upper

Engine
EngineMechanical-1.8VCT
CamshaftDriveBeltCover-FrontUpper
Remove
1.Disconnectbatteryearthlead.
2.Loosenlowerscrewsecuringdrivegearfrontupper
cover.
3.Remove5screwssecuringdrivegearfrontuppercover
torearuppercover.
4.Removedrivegearfrontuppercoverandseal.
Ret
1.Cleandrivegearfrontuppercover.
2.Fitsealtouppercover.
3.Fitdrivegearfrontuppercover,ensuringcorrect
positionofseal.
4.Fitscrewssecuringdrivegearfrontuppercoverand
tightento5Nm.
5.Tightenlowerscrewsecuringdrivegearfrontupper
covertoengineto5Nm.
6.Connectbatteryearthlead.
CamshaftDriveBeltCover-RearUpper
Remove
1.Disconnectbatteryearthlead.
2.Removecamshaftdrivebelt.
Camshaft Camshaft
Camshaft
Drive Drive
Drive
Belt Belt
Belt
3.Suitablyidentifyeachtiminggeartoitsrespective
camshaft.
4.RemovetiminggearlockingtoolT10029.
5.UseT10030torestraintiminggears,removebolts,
washersandgearsfromcamshafts.
6.Removeboltsecuringdipsticksupportbracket.
7.Removescrewsecuringdrivebeltrearuppercoverto
coolantpump.
8.Removeboltssecuringdrivebeltrearuppercoverto
engineandremovecover.
Version2.0188