MG MG6 Series 2011 - Vacuum Servo-Brake

BrakeSystem
Brake
VacuumServo-Brake
Remove
1.Removebatterycarrier.
Battery Battery
Battery
Carrier Carrier
Carrier
Bracket Bracket
Bracket
Remove Remove
Remove
2.Disconnect3multiplugsfromECM.
3.Removestrapsecuringengineharnesstobattery
carrierbracket.
4.Remove2boltssecuringbatterycarrierbracketto
enginecompartmentandremovebatterycarrier
bracket.
5.Disconnectmultiplugfrombrakeuidlowlevel
indicatorswitch.
6.Positionclothunderreservoirtoabsorbuidspillage.
Caution:Brakeuidwilldamagepaintnishedsurfaces.
Ifspilled,immediatelyremoveuidandcleanareawith
water.
7.Release2brakepipesfrommastercylinder.
Caution:Beforedisconnectingorremovingcomponents,
ensuretheimmediateareaaroundjointfacesand
connectionsareclean.Plugopenconnectionstoprevent
contamination.
8.Disconnectvacuumhosefrombrakeservo.
9.Removesteeringcolumnclosingpanel.
10.Removeclipandpinsecuringbrakeservopushrodto
brakepedal.
11.Remove4nutssecuringservotobodyandremove
servo.
12.Removeanddiscard2nutsandwasherssecuring
mastercylindertoservo.
13.Removeservoassembly.
Ret
1.Fitmastercylindertoservoandsecure,t2newnuts
andtightento25Nm.
2.Cleanmatingfacesofservoandbody.
Version2.0620