MG MG6 Series 2011 - Fittings and Release Mechanism

T ransmission
T ransmission-MT
8.Positionshiftandselectorshaftthroughcontrol
assembly.
9.Fit5th/Reversegearreturnspring,interlockassembly,
gearshiftarmguide,reverselockselectorassembly,
1st/2ndgearreturnspringandreturnspringthrust
plateinthecorrectsequence.
Caution:Ensurethattheabovecomponentsarettedin
thecorrectsequenceontheshaft.
10.Fitgearshiftlevertoshiftandselectorshaft.
11.Fitassembledpartsintohousingandtightenbolts
securinginterlockassemblyto30–40Nm.
12.Positionnylonblockandtgearselectorlever .
13.Fitmanualtransmissionassembly.
Manual Manual
Manual
Transmission Transmission
Transmission
Assembly–Refit Assembly–Refit
Assembly–Refit
FittingsandReleaseMechanism
Remove
1.Removeslavecylinderbracket.
2.Removecablesupportbracket.
3.Removereverselampswitch.
4.Remove3self-lockingdowelsassembly.
5.Removeoillleranddrainplugs.
6.Removeboltsecuringinterlockassembly.
7.Removecontrolassembly.
Version2.0428