MG MG6 Series 2011 - Crankshaft Rear Oil Seal

Engine
EngineMechanical-1.8T
CrankshaftRearOilSeal
Remove
1.Manualtransmissionmodels:Removeengineywheel.
Flywheel Flywheel
Flywheel
- -
-
Manual Manual
Manual
Transmission Transmission
Transmission
. .
.
2.Automatictransmissionmodels:Removetorqueconverter
driveplate.
Torque Torque
Torque
Converter Converter
Converter
Drive Drive
Drive
Plate Plate
Plate
- -
-
Automatic Automatic
Automatic
Transmission Transmission
Transmission
. .
.
3.Usingaburrfreeatendedscrewdriver,easecrankshaft
rearoilsealfromcylinderblockanddiscardseal.T ake
carenottomarksealingsurfaceoncrankshaft.
Ret
1.Cleanoilsealrecessincylinderblockandrunning
surfaceoncrankshaft.Itisessentialthattheseareasare
thoroughlyclean,freeofoldsealantanddry.
Tip:PleaseuseMGMOTORrecommendedsolvent.
2.Pleaselubricatethelipofoilseals.
3.FitT10059tothebackofcrankshaft.
4.Applya1.5mmbeadofsealanttothenewoilseal.
5.Pushtheoilsealtotheendwithhands.
6.UseT10040topushtheoilsealintocylinderblock.
7.FitoilsealreplacerT10033retaintoolusing3slave
bolts.
Version2.070