MG MG6 Series 2011 - Track Rod Ball Joint

FrontWheelSteering
SteeringSystem
tightento40–50Nm.
5.Fit2upperboltsandtightento40–50Nm.
6.Cleanpipeunionsandmatingfaces.
7.FitnewO-ringtoreturnpipe,connectpipeandtighten
unionto26–30Nm.
8.Fitnewsealingwasherstofeedpipe,connectpipeand
tightenunionto26–30Nm.
9.Raisesubframe,twashers,subframebracesand
newPatchlokboltssecuringsubframeandtightento
110–120Nm.
10.FitnewPatchlokboltssecuringsubframebracesto
bodyandtightento19–25Nm.
11.Fit2frontexhaustmountingsandremovesupport.
12.Cleanexhaustmatingfacesandtnewgasket.
13.Fitfrontexhaustpipe(turbomodels)orexhaust
manifold(VCTmodels)tointermediatepipe,tnut
andtightento20–25Nm.
14.Fitanti-rollbarlinkstoanti-rollbar,tnutsandtighten
to60–70Nm.
15.Connecttrackrodstosteeringarms,tnewnutsand
tightento
28–32Nm.
16.Fitroadwheelsandtightenboltsto115–130Nm.
17.Fitundertray.
Undertray Undertray
Undertray
- -
-
assembly assembly
assembly
Refit. Refit.
Refit.
18.Fitnewboltretainingsteeringjointtosteeringrack,t
newnutandtightento20–25Nm.
19.Fitsteeringjointsealandrepositioncarpet.
20.Bleedpowersteeringsystem.
Power Power
Power
assisted assisted
assisted
steering steering
steering
system system
system
bleeding bleeding
bleeding
Refit. Refit.
Refit.
21.Checksteeringgeometry.
Wheel Wheel
Wheel
alignment alignment
alignment
Refit. Refit.
Refit.
T rackRodBallJoint
Remove
1.Raisevehiclewithalift.
Warning:Donotworkonorunderavehiclesupported
onlybyajack.Alwayssupportthevehicleonsafety
stands.
2.Removeroadwheel.
3.Loosentrackrodendlocknut.
4.Removenutfromballpinanddiscard.
5.FitanM10nuttoballpin,ushwithendofpin.
6.UsingT38008,separateballpinfromtrackrod.
RemoveM10nutfromballpin.
7.Removetrackrodfromsteeringrack.Retainthetrack
rodlocknutinpositionasttingreference.
Ret
1.Fittrackrodenduptolocknutwithballpinfacing
upwards.
2.Connectballpintosteeringarm,tnewnutand
tightento28–32Nm.
3.Tightenlocknutto40–55Nm.
4.Fitroadwheelandtightenboltsto115–130Nm.
5.Removestandsandlowervehicle.
6.Checksteeringgeometry.
Version2.0529