MG MG6 Series 2011 - Inner Joint; Inner Joint Gaiter

Driveline/Axle
DriveAxle
InnerJoint
Remove
1.Removedriveshaft.
Shaft Shaft
Shaft
with with
with
both both
both
joints joints
joints
2.Placedriveshaftinvice.
3.Release2gaiterclipsanddiscard.
4.Removeintermediatedriveshaft.
5.Removeintermediatedriveshaftsnapringanddiscard.
6.Removeinnerjoint.
Ret
1.Cleandriveshaftandgaiter.
2.Fit2newclipsonthedriveshaft.
3.Positionnewinnerjointtodriveshaft.
4.Fitnewsnapringtointermediatedriveshaft.
5.Applygreasetothejoint.
6.Fitnewinnerjointtothedriveshaft.
7.Fitdriveshaft
Shaft Shaft
Shaft
with with
with
both both
both
joints joints
joints
InnerJointGaiter
Remove
1.Removeouterjointgaiter .
Gaiter Gaiter
Gaiter
- -
-
outer outer
outer
joint joint
joint
2.Measureandrecordttingdimensionsofdynamic
damper
3.Removedynamicdamper.
4.Remove2gaiterclips.Removeinnergaiterclipsand
gaiter.
5.Checkthegaiterandrenewifnecessary.
Ret
1.Cleandriveshaftandballjoint.
2.Applygreasetoinnerjoint.
3.Fitinnergaiterandsecurewithnewclips.
4.Lubricateandtthedynamicdamper.
5.Checkthatdimensioniscorrect,comparedtothe
originalmeasurementtaken.
6.Cleandriveshaftandouterjointgaiter.
7.Fitouterjointgaiter.
Gaiter Gaiter
Gaiter
- -
-
outer outer
outer
joint joint
joint
Version2.0650