MG MG6 Series 2011 - Engine Oil Pressure Check; Oil Pick - up Strainer

Engine
EngineMechanical-1.8VCT
EngineOilPressureCheck
Check
1.Removeoilpressureswitch.
Switch Switch
Switch
- -
-
Oil Oil
Oil
Pressure Pressure
Pressure
. .
.
2.Fitsealingwasherfromoilpressureswitchtooil
pressuregaugeadaptor.
3.Fitandtightenoilpressuregaugeadaptortooilpump
housing.
4.ConnectoilpressuregaugeT10001toadaptorand
tightenunion.
5.Checkandifnecessary,top-upengineoil.
6.Startandrunengineuntilnormaloperatingtemperature
isreached.
7.Noteoilpressurereadingswiththeenginerunningat
idleandat3500rev/min(Refertospecication).
8.Switchoffengine,unscrewgaugeunionandremove
gauge.
9.Removeadaptor.
10.Wipeoffoilspillage.
11.Fitoilpressureswitch.
Switch Switch
Switch
- -
-
Oil Oil
Oil
Pressure Pressure
Pressure
OilPick-UpStrainer
Remove
1.Removeenginesump.
Sump Sump
Sump
Reseal Reseal
Reseal
2.Remove2boltssecuringoilpickupstrainertooilrail.
3.Removeoilpickupstrainerandremoveanddiscard
'O'ringfromstrainer.
Ret
1.Cleanoilpickupstrainerandmatingfaces.
2.Lubricateanew'O'ringwithengineoilandtto
strainer.
3.Fitoilpickupstrainerandtightenboltsto7–10Nm
4.Fitenginesump.
Sump Sump
Sump
Reseal Reseal
Reseal
Version2.0186