MG MG6 Series 2011 - Lubrication System-Manual Transmission-Top up; Oil Seal-Differential-LH

T ransmission-MT
T ransmission
LubricationSystem–ManualT ransmission–T op
up
Check&TopUp
1.Raisevehicleonalift.
2.Cleanareaaroundllerplug.
3.Removellerplug.
4.Fillgearboxthroughllerplughole,untiloilislevel
withthebottomofthehole.
5.Cleanllerplug.
6.Fitgearboxllerplugandtightento30–40Nm.
7.Lowervehicle.
OilSeal–Differential–LH
Remove
1.RemoveLHdriveshaft.
LH LH
LH
Shaft Shaft
Shaft
with with
with
Both Both
Both
Joints–Remove Joints–Remove
Joints–Remove
2.Carefullyremoveanddiscarddifferentialoilseal,take
carenottodamageoilsealrecess.
Ret
1.Cleanoilsealrecess.
2.UsingT24010,tanewdifferentialoilseal.
Caution:Oilsealsarewaxedandmustnotbelubricated
priortotting.
3.FitLHdriveshaft.
LH LH
LH
Shaft Shaft
Shaft
with with
with
Both Both
Both
Joints–Refit Joints–Refit
Joints–Refit
4.T opuptransmissionoillevel.
Lubrication Lubrication
Lubrication
System–Drain System–Drain
System–Drain
& &
&
Refill Refill
Refill
Version2.0417