MG MG6 Series 2011 - Hinge - Front Door - Upper

BodySystems
Doors
outfromlowerdoorhingecompletely,thenremove
doorassembly.
Caution:Pleaseprotectpaintfromscratchwhen
removingorrettingthedoorassembly.
7.Removeupperandlowerdoorhingefromdoor
assembly.
Ret
1.Positionupperandlowerdoorhingetodoor,secure
withboltsandtightento30–36Nm.
2.Withassistance,positiondoortohinges.
Caution:Pleaseprotectpaintfromscratchwhen
removingorrettingthedoorassembly.
3.Fitlowerbolttolowerdoorhingeandtightento
30–36Nm.
Caution:Pleaseprotectpaintfromscratch.
4.Fitcapnuttoupperhingepinandtightento18–22Nm.
Caution:Pleaseprotectpaintfromscratch.
5.Connectmultiplugandsecureharnesssleeveto'A'
post.
6.Connectbatteryearthlead.
7.Checkdooralignment.
Hinge-FrontDoor-Upper
Remove
1.Removefrontdoor .
Door Door
Door
Assembly Assembly
Assembly
- -
-
Front Front
Front
Remove Remove
Remove
2.Removeboltsecuringupperhingefromoutsideof'A'
post.
3.Remove'A'postlowertrim.
Trim Trim
Trim
Finisher Finisher
Finisher
- -
-
'A' 'A'
'A'
Post Post
Post
- -
-
Lower Lower
Lower
Remove Remove
Remove
4.Removeboltsecuringupperhingefrominsideof'A'
postandremovehinge.
Ret
1.Positionhingeto'A'post
2.Fitupperhingewithboltsfrominsideandoutsideof
bodyseparately,tightento30–36Nm.
3.Fitfrontdoor.
Door Door
Door
Assembly Assembly
Assembly
- -
-
Front Front
Front
Refit Refit
Refit
4.Aligndooronhinges.
Door Door
Door
- -
-
Front Front
Front
- -
-
Align Align
Align
on on
on
hinges hinges
hinges
Refit Refit
Refit
5.Fit'A'postlowertrim.
Trim Trim
Trim
Finisher Finisher
Finisher
- -
-
'A' 'A'
'A'
Post Post
Post
- -
-
Lower Lower
Lower
Refit Refit
Refit
Version2.0774