MG MG6 Series 2011 - Latch - Boot Lid

RearClosures
BodySystems
Latch-BootLid
Remove
1.Removebootlidtrimcasing.
Trim Trim
Trim
Casing Casing
Casing
- -
-
Boot Boot
Boot
Lid Lid
Lid
Remove Remove
Remove
2.Remove3boltssecuringlatchtobootlid.
3.Disconnectlatchmultiplug.
4.Passreleasecablethroughbootlidapertureand
removelatchfrombootlid.
Ret
1.Positionlatchtobootlidandconnectmultiplug.
2.Passreleasecablethroughaperture,positionlatchto
bootlid,tboltsandtightento7–10Nm.
3.Fitbootlidtrimcasing.
Trim Trim
Trim
Casing Casing
Casing
- -
-
Boot Boot
Boot
Lid Lid
Lid
Refit Refit
Refit
Version2.0807