MG MG6 Series 2011 - Bonnet - Alignment - Check and Adjust

FrontClosures
BodySystems
Bonnet–Alignment–CheckandAdjust
Check
1.Checkbonnetalignment.Bonnettowingproles
mustbeushandgapsmustbeequal;frontcornersof
bonnetmustbelevelwithwings.
AdjustProleatRearofBonnet
1.Markhingeoutlineonbonnet.
2.Loosenboltssecuringhingetobonnet.
3.Adjustpositionofbonnettosetcorrectbonnetto
wingprole.
4.Tightenhingeboltsto20–29Nm.
AdjustProleatFrontofBonnet
1.Loosenstrikerlocknut.
2.Adjuststrikerandbonnetbuffertosetcorrectbonnet
towingprole.
3.Tightenstrikerlocknut.
AdjustGapsonFrontCorners
1.Markoutlineofbothhingesonbody.
2.Loosenboltssecuringhingestobody.
3.Adjustlateralandfore/aftpositionofbonnettoset
correctbonnettowinggaps,withfrontcornerslevel
withwings.
4.Tightenhingeboltsto20–29Nm.
Version2.0799