MG MG6 Series 2011 - Service Procedures; Trim Finisher - A Post - Upper - each; Trim Finisher - A Post - Lower - each

InteriorTrimandPaneling
InteriorFitting
ServiceProcedures
T rimFinisher-'A'Post-Upper-Each
Remove
1.Releasefrontdoorseal.
2.Release2clipssecuringscrewcoverto'A'posttrim
nisherandremovecover.
3.Removescrewsecuring'A'posttrimnisherto'A'
post.
4.Release2clipssecuring'A'posttrimnisherto'A'post
andremovenisher.
Warning:Alwaysfollowthe'SRSPrecautions'andthe
correctproceduresforworkingonSRScomponents.
PersonsworkingonSRSsystemsmustbefullytrainedand
havebeenissuedwithcopiesoftheSafetyguidelines.
Ret
1.Fit'A'posttrimnisherto'A'postandsecureclips.
2.Fitscrewsecuring'A'posttrimnisherto'A'post.
3.Fitscrewcoverto'A'posttrimnisherandsecure
withclips.
4.Fitfrontdoorseal
T rimFinisher-'A'Post-Lower-Each
Remove
1.Releasefrontdoorseal.
2.Releaseandremovebonnetreleasehandle(LHonly).
3.Release6clipssecuringlower'A'postnisherto'A'
postandremovenisher.
Ret
1.Fitlower'A'posttrimnisherto'A'postandsecure
clips.
2.Fitbonnetreleasehandle.
3.Fitfrontdoorseal.
Version2.0687