4-18
Detect operation
1
Scan in the Y direction (plus direction) to detect
the line.
• The buzzer sounds when the line is detected. If the line is not
detected, the buzzer does not sound.
2
Scan in the Y direction (minus direction) to detect
the line.
3
Scan in the X direction (plus direction) to detect
the line.
4
Scan in the X direction (minus direction) to detect
the line.
5
Follow the Steps 1 to 4, and confirm if the buzzer
sounds 4 times.
• When the detection behavior completes successfully, the
buzzer sounds 4 times.
• If the buzzer does not sound, contact our sales office after
checking the registration mark condition.
Minus
direction
Plus
direction
Scan in the Y direction
Scan in the Y direction
Minus
direction
Plus
direction
To Next Page
Loading...
