95
Kaleido-X
User’s Manual
3Drag Multicast from the Tools pane onto the network adapter.
The Multicast Stream Configuration window appears.
4In Multicast Stream Configuration, replace the default stream name if desired, select
the appropriate protocol (RTP, UDP), type the multicast group address and port
number associated with the transport stream you wish to add, and then click OK.
The Kaleido-IP establishes a connection with the selected stream. All programs that are
part of the stream, and the elementary streams included in these programs,
automatically appear under the transport stream element in the System list.
Notes
• The Kaleido-X software supports UTF-8 encoded stream names. The only
characters, which cannot be used in a stream name are:
@ / \ ' and ".
• Verify the protocol you selected. Registering an RTP stream as UDP instead
of RTP may result in the decoded video appearing jerky or accelerated on
the monitor wall.
To Next Page
Loading...
