53
Kaleido-X
User’s Manual
The timer monitor is updated accordingly.
3Use the Preset controls to set a new preset time.
4Click the Reset button to reset the timer to its initial value (based on timer mode and
preset time).
5Click the Start button to start the timer.
Controlling a Timer by Using an External Numeric Keypad
If a timer is assigned to the current RCP user, or else if a timer is assigned by default for the
room, then the external keyboard’s numeric keypad controls this specific timer.
Note: The reserved keys are always enabled, whether Num Lock is set or
not.
To Next Page
Loading...
