182
Setting Up Rooms
Configuring Displays
3On the File menu, click Save.
Configuring Custom Resolutions from the Tools Menu
To create a custom display resolution from the Tools menu
1On the Tools menu, click Edit resolutions.
The Edit Resolution Settings window appears.
2 Select the resolution you wish to customize (or the one on which you wish to base a
new resolution), from the list at the bottom of the window.
3 Under either the Porch or the Modeline section—depending on whether you prefer to
specify front porch, back porch, sync, and active values, or blank start, sync start, sync
Note: When you modify one of the default resolutions, you can only save
your changes as a new resolution. On the other hand, custom resolutions
can be tweaked and saved repeatedly until the desired configuration is
achieved. However, make sure that the active width and active height values
you specify match those of one of the default resolutions, otherwise your
custom resolution will be ignored.
Select to enable
automatic detection
of EDID information
To Next Page
Loading...
