213
Kaleido-X
User’s Manual
6On the File menu, click Save.
Zooming and Panning a View
To adjust the portion of a layout or room that is shown in the main window
• Press and hold the Ctrl key, then press the plus key (+) to zoom in or the minus key (–)
to zoom out.
• Press and hold the Ctrl key, then rotate the mouse wheel to zoom in or out.
• Type the zoom factor you wish to apply (in the range of 2% to 1600%) directly in the
zoom box.
• Press and hold the spacebar, then click and drag to pan.
• Use the scroll bars at the right side and bottom of the Layouts or Rooms tab.
• In the case of a layout view, click and drag the layout navigator’s red rectangle in the
Tools pane.
Showing and Hiding the Layout Navigator
To show or hide the layout navigator
•On the View menu, click Navigator. Alternatively, press Ctrl+Shift+N.
The layout navigator will appear in the Tools pane if it was hidden, and vice versa.
Configuring Video Monitors
Resizing a Video Monitor
To resize a video monitor
• Drag any of the corner handles, inwards or outwards.
The video monitor, and the associated video window, will become smaller or larger,
and they will both keep their aspect ratio.
• Drag any of the side handles, inwards or outwards.
The bounds of the video monitor will change, while the video window will still keep its
aspect ratio.
• Change the aspect ratio property of the video monitor. See Setting a Video Monitor’s
Aspect Ratio below.
To Next Page
Loading...
