315
Kaleido-X
User’s Manual
serious consequences. To avoid such problems, it is desirable to give operators access only
to those crosspoints they need, by creating logical routers.
To add a logical router
1In the Routers list, click the Logical routers folder, and then click Add router under the
Router configurations tab.
A new sub-folder is added to the Logical routers folder. This new folder is automatically
selected, and a third-level tab bar appears under Router configurations, with the
Configuration tab selected.
2 Type a name (e.g. “SmallLogicalRouter”) in the Logical router name box. This is the
name that will appear on monitor wall in the Assign [router] input menu. Ignore the
Logical router matrix ID box for now. Type the desired number of sources and
destinations (e.g. 16
× 4).
To Next Page
Loading...
