394
Administration and Servicing
Network Considerations & Port Usage
From Multiviewer to Peripheral Devices
From Peripheral Devices to Multiviewer
The following ports must be open on peripheral devices (e.g. router controllers):
Router drivers also use default ports:
Service Port Transport Notes
SMTP 25 TCP Simple Mail Transfer Protocol, for e-mail alerts.
Port Transport Notes
2000 TCP Used to control the Kaleido-X internal router via the Snell
(Pro-Bel) SW-P-02 protocol
4381 TCP Used to control the Kaleido-X internal router via the Nevion
(Network) protocol
5194 TCP Used to control the Kaleido-X internal router via the NVISION
Ethernet protocol
- Compact router protocol.
14000 TCP Used to control the Kaleido-X internal router via the Snell
(Pro-Bel) SW-P-08 protocol
Driver Port Transport Notes
ETL 4000 TCP
GVG 7000 Native 12345 TCP
NVISION Ethernet
protocol - Enterprise
router
9193 TCP
VikinX Modular 4381 TCP
Quintech 9100 TCP
Sony HKSPC 12345 TCP GVGNP Emulator
Utah RCP-3 5001 TCP SC-4 Ethernet
Snell (Pro-Bel) SW-P-02 2000 TCP
Snell (Pro-Bel) SW-P-08 14000 TCP
Note: This is configurable in XEdit—you can choose any UDP or TCP/IP port
to use for communications between the multiviewer and an external router.
To Next Page
Loading...
