282
Managing RCP Users
Setting RCP User Preferences
Assigning a Timer to a Room
To assign a default timer for all RCP users in a room
1 In the main window, click the RCP users tab, and then select the room to be assigned a
timer, from the hierarchical list.
2In the Properties pane, click the Timer box, and then select the appropriate timer to be
controlled by default from this room.
Setting RCP User Preferences
To modify the preferences for an RCP user
1 In the main window, click the RCP users tab, and then select the user whose
preferences you wish to set, from under the appropriate room, in the hierarchical list.
The selected RCP user’s preferences (layout presets, full screen assignment, audio
monitoring output, external keyboard configuration, and timer) are listed in the
Properties pane.
2 Modify the preferences as needed. See Assigning Room Layouts to a Kaleido-RCP2
User’s Presets on page 283, Assigning a Full Screen Layout to an RCP User, on page 283,
Assigning Audio Output to an RCP User, on page 284, and Setting the Keyboard
Language, on page 285.
3 Modify the system-level attributes for this user (user name, description, password) as
needed.
See Changing an RCP User’s Name and Password on page 287.
Note: User preferences are specific to an RCP user in a specific room. If no
preferences have been specified for an RCP user, then the corresponding
room preferences apply. They appear in gray in the Properties pane.
Note: These system-level attributes are specific to a user, independent of
the room to which the user is assigned.
To Next Page
Loading...
