435
Kaleido-X
User’s Manual
In the case of a Kaleido-X multiviewer model, you can identify which output card
currently assumes the software master role (and is thus assigned the multiviewer’s IP
address) by looking for the word “master” next to the card’s identifier, for example:
“OUTPUT A (master)”.
Viewing Kaleido-X Version Information
To view your multiviewer’s system and software version information
1 From a workstation on the same subnet, open a Web browser window and type the
multiviewer’s IP address in the address bar.
14
The Kaleido-X home page appears, showing the system’s and XEdit’s software version
information at the bottom.
2Click the XAdmin button.
The XAdmin Status and Options page appears.
14.The multiviewer must have Kaleido-X software version 2.10 or later.
Firefox users:
If you see a security warning instead of the home page, then refer to
Registering your Multiviewer's Security Credentials with your Browser, on
page 421.
Expand details
Refresh
Reset card
Master card status
indicator
To Next Page
Loading...
