263
Kaleido-X
User’s Manual
Its appearance will change to reflect the new properties.
5 Repeat this for each monitor whose properties you wish to change.
6 Click the Select button on the toolbar to exit format-painting mode when you have
finished.
Copying Size from one Monitor to Another
The size of every monitor in a layout can be adjusted by the user, by dragging handles on
the boundary box that appears when the monitor is selected. The Copy size tool
copies
the size from one monitor to another monitor of the same kind.
To use the Copy size tool
1In the Layouts tab, click the monitor whose size you wish to copy to another monitor of
the same type.
The monitor’s boundary box appears.
The Copy size button becomes available on the toolbar.
2Click the Copy size button to switch into size-painting mode.
3 Point to another monitor of the same kind in the layout.
The pointer changes to a pointing finger , indicating that the size of the first monitor
(whose boundary box is still shown) can be copied onto the monitor beneath the
pointer.
4 Click the monitor beneath the pointer to copy the size onto that monitor.
Its size will change to match that of the first monitor.
5 Repeat this for each monitor whose size you wish to change.
6 Click the Select button on the toolbar to exit size-painting mode when you have
finished.
Managing Widget Libraries
Creating a Widget Library
To create a widget library
1Click the Layouts tab.
2 Right-click inside one of the predefined widget libraries in the Tools pane, and then
click New widget library on the shortcut menu. Alternatively, click New widget library
on the File menu.
Note: To have the width and height copied as well, press and hold the Ctrl
key while clicking the monitor.
Note: The Copy size tool does not copy any other property from one
monitor to another.
To Next Page
Loading...
