163
Kaleido-X
User’s Manual
2 Right-click the appropriate level category, and then click Add level on the shortcut
menu.
A new level appears under the selected category.
3 If you wish to change the level name, click the level header, and then, in the Properties
pane, type the new name in the Level name box.
In the case of an alarm level, you may also set its contribution to your system’s global
alarms.
See Configuring an Alarm Level’s Contribution below.
4On the File menu, click Save.
The sources table is saved.
Configuring an Alarm Level’s Contribution
You can select which alarm levels contribute to the global alarm associated with every
logical source, and rank their individual contribution.
To configure an alarm level’s contribution to your system’s global alarms
• In the sources table, click the column header for the level you wish to configure.
The Properties pane shows the name of the selected alarm level, and its current
contribution settings.
To Next Page
Loading...
