224
Creating Layouts
Configuring Video Monitors
To set the subtitling properties of a video monitor
1 In XEdit, open a layout and click the video monitor for which you wish to specify
subtitling properties.
The CC/Subtitling settings appear in the Properties pane.
2 Select the Text enabled check box.
3 Select a value from the Text mode list.
4 Select the appropriate option from the Text colors list.
• Auto: To display text in colors, as defined in the signal.
• Black & white: To display white characters against a black background, regardless
of what is specified in the signal.
5 Specify an CEA-708 service value, if necessary, and then click Apply.
• The Kaleido-IP supports extraction of CC/subtitling and XDS data
(1
license/program). It is not yet possible to enable or verify the CC/XDS
option in XAdmin’s Status and Options page, for this multiviewer model.
Contact Technical Support for activation and configuration instructions
(see
Contact Us, on page 453).
Note: Double-click the video monitor, if is part of a composite monitor.
Notes (continued)
To Next Page
Loading...
