128
Calibrating the Kaleido-X
Multiviewer Input Calibrations
5In the Properties pane, type the page number you wish to be the default selection for
Page A, in the Teletext Page A Selection box. Alternatively, use the slider to set the
page number.
6Click Apply to all if you wish this setting to be the default Page A selection for every
video signal on your system.
7 Repeat the procedure for the Page B, C, and D elements.
Calibrating Metadata Holding Time
To calibrate metadata holding time
1 In the main window, click the System tab, and then click Description/Calibrations on
the second-level tab bar.
A hierarchical list representing the current system appears.
2 In the list, expand the multiviewer whose inputs you wish to calibrate.
Note: On the monitor wall, only Page A will be available with the associated
video signal. However, alarms can be configured for all four preset pages.
See Configuring Alarm Debouncing on page 144 for instructions on how to
configure an alarm.
To Next Page
Loading...
