98
Managing Kaleido-X Systems
Configuring the System Representation
Modifying a Transport Stream
To modify the settings for a transport stream
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, and then navigate to the transport stream you wish
to configure.
The settings for the selected stream appear in the Properties pane.
Stream source settings (example showing settings for an any-source multicast stream)
3 Replace the default stream name if desired, select the appropriate protocol (RTP, UDP),
and enter the multicast group IP address (in the case of a multicast stream) and port
number associated with the actual transport stream you wish to monitor. In the case of
an SSM (or SFM) stream, enter the IP address associated with the specific source you
wish to monitor in the SSM source IP address box.
Note: Under the network adapter elements, transport streams are listed in
alphabetical order.
To Next Page
Loading...
