383
Kaleido-X
User’s Manual
Hardware and Software Options
You can purchase various software and hardware options to expand your multiviewer’s
capabilities. The following tables list options that can be enabled and disabled via the
XAdmin Status and Options page (see
Enabling Options, on page 411).
KMV-3901/3911 default IP settings
System IP address 192.168.3.31
Network mask 255.255.255.0
Gateway 192.168.3.1
Kaleido-X16 default IP settings
System IP address 10.0.3.70
Network mask 255.255.0.0
Gateway 10.0.0.1
Kaleido-X default IP settings
4RU 7RU
14RU
(expansion)
System IP address 10.0.3.70 10.0.3.70 10.0.3.70
Network mask 255.255.0.0 255.255.0.0 255.255.0.0
Gateway 10.0.0.1 10.0.0.1 10.0.0.1
Output A 10.0.3.69 10.0.3.66 10.0.3.66
Output B 10.0.3.68 10.0.3.67 10.0.3.67
Output C — 10.0.3.68 10.0.3.68
Output D/EXP — 10.0.3.69 —
Output A (frame B) — — 10.0.3.61
Output B (frame B) — — 10.0.3.62
Output C (frame B) — — 10.0.3.63
Note: If the IP address of the multiviewer has been changed (i.e. it no
longer corresponds to the as-shipped configuration), it is still possible to
determine the current setting. To determine the IP address of your
multiviewer, see
Finding a Multiviewer’s System IP Address and Application
Version, on page 400.
To Next Page
Loading...
