239
Kaleido-X
User’s Manual
The selected logical source’s name appears in the Source box, and the Timer source
box shows the value of the corresponding time code level.
5 Click the button beside Timer source.
The Timer Editor window appears.
6 Choose a timer (see Configuring Timers, on page 234) from the Timer List.
It is also possible to assign a timer to a timer monitor by dragging an existing logical
source (containing a timer assignment) to the monitor.
7Click Save.
Note: The first time code level applies by default. If your system’s logical
sources include more than one time code level, select the one you wish to
apply from the Time code level list.
Note: Each timer monitor is assigned to exactly one timer. Multiple timer
monitors can be assigned to the same timer. Start/stop/reset or mode
changes applied to one monitor affect all other monitors assigned to the
same timer.
Assigned logical source name
Time code level value from assigned
logical source
To Next Page
Loading...
