271
Kaleido-X
User’s Manual
4In the Tools pane, click and drag an alarm from the filtered System list onto the new
action. This defines the alarm as the trigger for the action.
Alternatively, right-click the action and select the alarm source from the shortcut menu.
5From the Action list area of the Tools pane, drag one of the available action items onto
one of the six columns at the bottom of the Actions tab.
Note: You do not have to perform this step for actions triggered by
Gateway commands, because the Gateway alarm itself acts as the trigger.
See
Creating an Action that can be Triggered via a Gateway Command, on
page 273.
To Next Page
Loading...
