Mirion Technologies MiniSentry-2 - Page 28

USE MANUAL
MINISENTRY-2
26 / 170
107911_D User manual MINISENTRY-2_En.docx
MIRION TECHNOLOGIES (Canberra) S.A.S, BP249, ZI de Vauzelles, 3760
2
Loches Cedex
Starting continues following one of two cases:
− Without FRISKER CSP probe connected,
− With FRISKER CSP probe connected.
Without FRISKER CSP probe connected
At power on, the LED associated will flash with on the screen the message « Searching… », « Probe
found » then « Initializing »:
With FRISKER CSP probe connected
By connecting a CSP probe, the two LEDs associated will flash with on the screen the message
« Searching…. », « Probe found » then « Initializing »:
At the end of the probe search, Minisentry-2 is in Walk Through Mode and the lights are fixed green on
the connected interface.