Mitel 430 - Page 108

Installation
108
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
Basic access in the private leased-line network
Fig. 33 BRI-S basic rate interface external, networked with copper line
Tab. 41 Connection of BRI-S basic rate interface
external, networked with copper line
Bus configuration
BRI-S
ext. is subject to the conditions that apply to terminal interface BRI-S (see "BRI-S
terminal interfaces", page 122).
Fig. 34 Basic rate interface BRI-T, networked with leased-line or dial-up connection
Tab. 42 Cabling for basic rate interface BRI-T, networked with leased-line or dial-up connection
See also
Chapter "Connections with basic accesses" in the PISN/QSIG Networking System Manual.
PINX 1 signal
Basic access BRI-S
ext.
Cable cores
PINX 2 signal
Basic rate interface BRI-T
cc
f f
ee
dd
PINX1 signal,
basic rate inter-
face BRI-T
Cable cores NT1 Network NT1 Cable cores
PINX 2 signal,
basic rate inter-
face BRI-T
ccc c
fff f
eee e
ddd d
4
BRI-T
BRI-S
extern
PINX 1 PINX 2
Copper line
max. 1,000 m
BRI-T
PINX 1
NT1
NT1
BRI-T
PINX 2
Leased-line
or dial-up
connection