Mitel 430 - Various Phones, Terminals and Equipment

System Overview
27
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
Tab. 9 Analogue Mitel phones
2. 5 Various phones, terminals and equipment
Thanks to the use of international standards other clients, terminals and phones, Mitel
and third-party, can be connected and operated on the communication server:
• SIP-based phones
With the integrated SIP protocol SIP-based phones (softphones, hardphones) - or
via an SIP access point also WLAN and DECT phones - can be connected to the
communication server. Besides the basic telephony functions, features such as call
transfer, conference calls or CLIP/CLIR are also supported. Function codes can
also be used to operate various system functions.
• Cordless phones
The sturdy 9d DECT phones from the Ascom Wireless Solutions product portfolio
can be logged on to the communication server as system phones. User-friendly
messaging and alarm systems can thus be implemented in combination with the
IMS (Integrated Message Server). Other DECT phones can also be operated in
GAP mode.
• Analogue terminals
All terminals (phones, fax, modem, etc.) approved by the network operator can be
connected on the analogue terminal interfaces. The communication system sup-
ports pulse and frequency dialling modes.
• ISDN terminals
ISDN terminals that comply with the Euro ISDN standard can be connected to the
Product Principal common features Additional model-specific features
• Destination dialling keys
• Frequency dialling or pulse dialling
• Handsfree
• Adjustable volume (handset and
loudspeaker)
• System features can be used via
function codes
• Headset connection
• Wall mounting possible
• Functions controllable via communi-
cation server: Message display
on/off, delete redial key memory.
• Ideally suited for hospitality and
hotel environments
Mitel 6730 Analogue:
• Three-line display
• 100 phone book contacts
• 50 entries each on call list and redial
list
• Number/name display for incoming
calls
• Clock with wake-up function
• Functions controllable via communi-
cation server: Delete call lists and
local phone book, set date, time and
language.
Note:
The Aastra 1910 and Aastra 1930 analogue phones are still supported.
Mitel 6710
Analogue Phone
Mitel 6730
Analogue Phone