EasyManua.ls Logo

Mitel 430 - Longclicks on Mitel DECT Cordless Phones

Mitel 430
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation and Maintenance
241
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
6. 5. 2. 8 Longclicks on Mitel DECT cordless phones
In normal DECT cordless phone operation, long-clicking the following keys accesses
additional functions directly.
Tab. 111 Longclicks on Mitel DECT cordless phones
Function Office 135 Office 160
Mitel 600
DECT
In a list box: change scroll direction. Long-click "
>
" switches to "
<
" and vice
versa
Foxkey
right
Foxkey
right
Direct access to the configuration menu M M
Switch cordless phone on/off C, 0 0 End key
Switches over to the next radio system temporarily. 1 1 2
Indicates the radio system parameters (cordless phone IPEI and radio system
PARK). With each additional call the next radio system is indicated in each
case if there are other logons.
22—
Indicates the cordless phone’s internal diagnostics. 3 3
Switches to a special alarm menu of the cordless phone. 3
1)
1) Mitel 630 DECT only
Indicates the data of the valid radio unit (“Show Measurement Mode”, see
“Planning DECT Systems” in the User’s Guide).
44—
Indicates the cordless phone’s firmware version. 5 5
Jumps to the cordless phone’s service menu. 5
Indicates battery charge status and the type. 6
Indicates the communication server’s software version. 7 7
Activates "semi" key lock. See Operating Instructions for details. 8 8
Activates key lock. See Operating Instructions for details. 9 9 #
Switch dialling type DTMF on/off. See Operating Instructions for details.

Switch tone ringing on/off.
Jumps to the cordless phone’s tone ring menu. Loud-
speaker
key
Loud-
speaker
key
Menu for display contrast, display backlighting, area tone and overload tone.
See Operating Instructions for details.
##—
Configuration mode for hotkey. See Operating Instructions for details. Hotkey Hotkey Hotkey
Switch error messages on/off (default value: Off). Messages relating to the fol-
lowing errors cannot be switched on/off: HS logon error, incorrect location reg-
istration, no locatable radio unit, network, system or radio unit overload.
5 + 3 5 + 3

Table of Contents

Other manuals for Mitel 430

Related product manuals