Mitel 430 - Mitel 6700 SIP; 6800 SIP Phones

Configuration
181
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
Here you can create, with the help of the export function, a specific Excel file hereinaf-
ter referred to as Export file. The export file contains several spreadsheets. Each sheet
covers a specific configuration area. Subsequently, edit then re-import the export file.
Only the data belonging to the view, on which you have activated the import function,
will be imported. Example: The import function in the Phone book / Public view imports
only the data from the export file located on the spreadsheet Abbreviated dialling list.
Exception: The export function in the Backup view imports the data in all spread-
sheets.
You can find the export function in the following views:
• Overview (user data and key configuration of the terminals)
• Abbreviated dialling numbers
• PISN user
• Time controlled functions
• Ext./Int. Allocation
• LCR
• Blacklist
• CLIP based routing
• Data backup
Note:
You can activate the Replace existing configuration option with the import function. Activate this
function only if you are setting up the communication server from scratch. This action deletes all
previously configured user data and all user associated settings such as DDI numbers, CDE
targets, user group entries, assigned phones, configured keys, etc.
5. 6. 6 Mitel 6700 SIP / 6800 SIP phones
Prior to the registration, reset any phones that were already in operation back to the
factory setting. For security reasons, delete the phone's MAC address in WebAdmin.
This prevents problems during registration.
Use these procedures in the following cases:
• Assigning the phone to another user on the same system
• Transferring the phone to another system with the same software release
• Changing the software release from R4.0 SP1 to an earlier release
• Changing the communication server IP address.