Mitel 430 - User Access Control; User Accounts and Authorization Profiles; User Accounts

Configuration
169
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
5. 3 User access control
Access to the configuration is password-protected. Any user wanting to log in to a com-
munication server is prompted for his user name and password (access data).
5. 3. 1 User accounts and authorization profiles
A user's authorizations are regulated by authorization profiles, which are assigned to
the user accounts.
5. 3. 1. 1 User accounts
Default user account for initial access
When a new communication server is opened or after a first start, the default user ac-
count (admin) and several authorization profiles are created. The default user account
is linked with the authorization profile Administrator. This authorization profile is as-
signed the administration rights for the User access control for Audio services and for
WebAdmin at the Administrator authorisation level.
The required user accounts and authorization profiles can be set up using the default
user account.
To access the default user account (Default User Account) enter the following:
Tab. 83 Standard user account and standard password
Note:
To prevent unauthorised access to the communication server, it is necessary to modify the
default password during first access. For password selection and input, see "
Password syntax",
page 171.
Other predefined user accounts
The predefined user account MMCC is meant for operating a Mitel Mobile Client Con-
troller.
The two predefined user accounts blustar and bucs are meant for BluStar terminals
and for a BluStar server.
You can see the predefined user accounts in the User account ( =a7) view.
Note:
The predefined user accounts cannot be deleted.
User name admin
Password password