Mitel 430 - Signal Destinations

Operation and Maintenance
231
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
6. 5. 1. 3 Signal destinations
After a first start, all event tables are exactly assigned to a message destination. (Ex-
ception: Local destination and SNMP destination use this event table.) You can assign
event tables to several or no message destinations
The destinations are configured in the Message destinations ( =h1) view.
Signal destination system phone
Depending on the allocated event table (normally Table 1), event messages are sent to
all the system phones that have a display and are entered in message group 8.
External signal destinations
Depending on the event table allocated, event messages (normally Table 2) are sent to
a specified external signal destination. Two external signal destinations can be speci-
fied:
• 1 primary external signal destination
• 1 alternative external signal destination
If the system issues an event message, the event message opens a PPP communica-
tion channel from the public network of the communication server to a terminal adapter
or modem. Once the event message has been confirmed, the system clears down the
PPP connection.