EasyManua.ls Logo

Mitel 430 - Page 48

Mitel 430
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Expansion Stages and System Capacity
48
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
Standard Media Switch modes of operation
The operation mode of the integrated standard media switch is defined with the VoIP
mode parameter in the Media resources ( =ym) view. The configured mode is al-
ways valid for the entire node.
Tab. 19 Integrated Standard Media Switch modes of operation
Reserving audio channels
The allocation of audio channels between voice mail, auto attendant, call recording
and announcements is set in the general voice mail settings ( =u1).
An audio channel is always used for Auto attendant when an incoming call triggers
greetings from mailboxes which are assigned an Auto Attendant profile. Audio chan-
nels of auto attendant are also used for queues with announcement. In all other cases
one audio channel is used for voice mail in connection with the voice mail system.
Audio channels for call recording are used exclusively for the manual or automatic re-
cording of phone calls.
Audio channels for announcements are used if the announcements have audio files.
No audio channels are required for normal announcements by phone.
If no audio channel is reserved for any of the functions described above, or if all re-
served audio channels are already used, audio channels from the Non-re-
served/shared pool are used.
No audio channels can be reserved for conference bridges. Audio channels from the
Non-reserved/shared pool are always used for the conference bridge.
Announcement service and music on hold use their own resources.
VoIP mode Explanation Licences
No VoIP No VoIP channels can be configured.
G. 711 Although more voice channels are available
per DSP in mode G. 7 11 than in hybrid mode,
the volume of voice data is greater and
requires a greater bandwidth.
Two VoIP channels per system can be used
without a licence. One VoIP Channels for
Standard Media Switch licence is required
for each additional VoIP channel.
G.711/G.729 The VoIP hybrid mode G. 7 11 / G.7 2 9 handles
both G.711 and G.729 for coding voice data.
One VoIP Channels for Standard Media
Switch licence is required for each VoIP
channel.
Secure G.711 Same as G. 711 but with a more secure data
transmission using the SRTP protocol.
One VoIP Channels for Standard Media
Switch licence is required for each VoIP
channel. The Secure VoIP licence, valid
right across the system, is also required.
S e c ur e G. 7 11 / G. 72 9 Same as G.711/G.729 but with a more
secure data transmission using the SRTP
protocol.
One VoIP Channels for Standard Media
Switch licence is required for each VoIP
channel. The Secure VoIP licence, valid
right across the system, is also required.

Table of Contents

Other manuals for Mitel 430

Related product manuals