PROTOCOL-SPECIFIC INFORMATION
Table 55: ZSW1 Status Word Mapping
0
Not ready to run command ON
1
2
3
1 Fault Present
Inverter tripped as indicated by register 100 bit
15
0 No Fault
No trip present as indicated by register 100 bit
15
4
Follows STW1 bit 1, ON2 active
Follows STW1 bit 1, OFF2 active
5
Follows STW1 bit 2, ON3 active
Follows STW1 bit 2, OFF3 active
6
Not ready to run command ON
8 1 Speed Within Tolerance
Actual value equals the reference value and is
within the tolerance as indicated by SU. Refer to
To Next Page
Loading...
